Rain Master RME HAWK, User Manual

Page: 52 / 72

sure not to have any program go over the 5 hours total runtime (check in review mode).
You must also ensure your system can supply the volume of water required to supply 4
stations at one time.
To activate No Stack feature:
Successively Press: until you see
Press: (remember this is a toggle key when used in the
Setup mode) until you see
Press:
DELAY
This feature allows you to program a delay time between stations. A programmable delay
can be useful to allow stations to reach a steady state condition before energizing the next
station.
EXAMPLE: You want to have a 68 second delay time between stations being turned on
Successively Press: until you see
Press: you will see
Press:
Note: Screen will read seconds only up to 255 seconds.
SECURITY CODE
Note: This feature should only be used where security is limited.
The RME HAWK controller has the capability to enter a password code which must be
entered before any function(s) can be executed. This code can be up to 4 numbers long.
Use a number that can be easily remembered, and have it written down should you forget.
Entering A New Security Code
EXAMPLE: You wish to enter the year you were born as a code 1960
Successively Press: until you see
Press:
Press:
QUIT
SETUP
ENTER
S T A C K
PROGRAM
SUN
1
N O S T A C K
PROGRAM
SETUP
D E L A Y 0 0 0
PROGRAM
FRI
6
8
ENTER
D E L A Y 0 6 8
PROGRAM
QUIT
SETUP C O D E 0 0 0 0
PROGRAM
SUN
1
FRI
6 9 0
ENTER
50