Rain Master RME HAWK, User Manual

Page: 62 / 72

Successively Press: until you see
Press: you will see
Press:
Station 7 will begin watering. To stop watering at any time, press MANUAL.
Note: If you have selected a Normally Closed Master Valve, the Master Valve will come
on also. If Station 7 is in any program which has a pump assigned
to it, then the Pump (Station 1) will come on also.
you will see
The value on the left is the measured or (nominal) flow and the value on the right is a
previously established limit (both in GPM). The flow display will update once every 10
seconds.
You now watch the display until you see that the flow has reached a stable value and you
want to use that value (adjusted up by the flow percentage) for your limit.
Suppose the stable value is 45 GPM, then your display will be
Press: you will see
and your new limit will be 45 adjusted up by 30% which is 58 GPM.
EXAMPLE 4: You want to just turn Station 7 on and monitor its flow without changing
its upper flow limit.
Successively Press: until you see
Press: you will see
Press:
Station 7 will begin watering and its flow will be displayed. The Master Valve and/or Pump
may also be on depending on conditions as described in the previous example.
you will see
L I M I T S
PROGRAM
SETUP
7 - 2 0 0
PROGRAM
ENTER
SAT
7
MANUAL
0 5 2 2 0 0
PROGRAM
0 4 5 2 0 0
PROGRAM
L I M I T S
PROGRAM
ENTER
L I M I T S
PROGRAM
SETUP
7 - 2 0 0
PROGRAM
ENTER
SAT
7
MANUAL
0 5 2 2 0 0
PROGRAM
60