Rain Master RME HAWK, User Manual

Page: 33 / 72

SKIP DAYS
MON
2
WED
4
ENTER ENTER
SKIP DAYS
CLEAR
QUIT
SKIP DAYS
ENTER
QUIT
31
SKIP DAYS
This is used to establish a number of days between watering, from 1 to 30, and how many
days are left till the first watering will begin. If information has been entered in the past,
the Skip Day number will be shown in the display. The Program # is shown in the display
as a convenience.
Note: 0 days left means the watering day is today.
Note: By using the skip days mode you can have a program water every 2nd, 3rd, 4th,
... or 30th day as may be desired.
EXAMPLE: You wish to skip 2 days and water every third day, and to start it 4 days from now.
Press:
The controller goes back to the automatic mode.
To clear all Skip Days information,
Press:
the controller goes back to the Automatic Mode.
To review Skip Days information
Press:
and the skip day number is shown,
Press: (the number of days left before
the next watering is shown.)
Press:
The controller goes back to the Automatic Mode.
STATIONS AND WATERING TIMES
Any station may be placed in any program. Stations may be placed in more than one
program at a time if desired. Within each program, each station can have a different
runtime. Each program can individually be selected (via SETUP) to be either a conventional
program or a cycle and soak program. Depending upon the selection, the RME HAWK
will prompt for the appropriate information whenever the STATION key is pressed.