Rain Master RME HAWK, User Manual

Page: 55 / 72

Successively Press: until you see
Press: (Toggle Key) you will see
Press:
CYCLE AND SOAK
Using this feature allows you to select each program to be a cycle and soak program or not.
For a description of what a cycle and soak program means see the QUICK AND BASIC
PROGRAMMING section of this manual under the heading of STATIONS AND
WATERING TIMES.
EXAMPLE: You wish to make programs 1, 2 and 3 cycle and soak programs.
Successively Press: until you see
Press: you will see
Press:
FLOW SENSOR FEATURES ENABLED/DISABLED
This Setup allows you to select the flow sensor features or not.
For a general description of how the flow features work, see the FAULT DETECTION
OVERVIEW section of this manual.
Note: All the rest of the Setups after this one are related to the Flow Sensor features and will
be skipped if the Flow Sensor features are not enabled here.
If you have a Flow Sensor connected to the controller and you wish to activate the Flow
Sensor features:
Successively Press: until you see
Press: (remember this is a toggle key when
used in the Setup mode) until you see
Press:
QUIT ENTER
SETUP
SUN
1
A L A R M O F F
PROGRAM
A L A R M O N
PROGRAM
53
S O A K
PROGRAM
SUN
1
MON
2
TUE
3
SETUP
ENTER
QUIT
S O A K 1 2 3
PROGRAM
F L O W O F F
PROGRAM
SUN
1
SETUP
QUIT
F L O W O N
PROGRAM
ENTER