Rain Master RME HAWK, User Manual

Page: 40 / 72

The Stack operation ensures that you will always get the number of watering cycles you
desire and at the same time your system will never be under-pressurized because two
programs are running simultaneously.
Note: The controller is shipped with Stack active, however, it may be programmed so
that multiple programs can be run simultaneously. See SETUP.
START TIMES
This is used to set the start time for a program. The Program # is shown in the display
as a convenience.
EXAMPLE: You wish the program to start watering at 7:10 AM and 4:30 PM
Press: (The controller goes
to Start Time 2.)
(The controller goes
to Start Time 3.)
Press:
The controller goes back to the Automatic Mode.
To review Start Times
Press: (Start Time 1 is displayed).
To review Start Time 2
Press:
Press:
The clock goes back to the Automatic Mode.
To clear a start time, such as Start Time 2
Press: (Start Time 1 is displayed).
To get to Start Time 2
Press: (Start Time 2 is displayed.)
To clear it
Press:
The clock goes back to the Automatic Mode.
START
TIMES
SUN
1
SAT
7 0
ENTER
TUE
3
WED
4
0
AM
PM
ENTER
QUIT
START
TIMES
ENTER
QUIT
START
TIMES
ENTER
CLEAR QUIT
38