Rain Master RME HAWK, User Manual

Page: 43 / 72

MANUALLY ACTIVATED FUNCTIONS WITH EXAMPLES
The Manual Mode offers four different features shown below:
MANUAL PROGRAM
This is used to run a program - assuming stations are in the program.
EXAMPLE: You wish to run Program 1.
Press: (The display shows a 1 to indicate
Program 1 is running. The active
stations are also displayed.)
The controller goes back to the Automatic Mode.
To advance to the next station when the program is already watering:
Press:
To stop the watering program that is currently running:
Press:
The controller goes back to the Automatic Mode.
MANUAL STATION
This is used to run a selected station for a selected time.
EXAMPLE: You wish to water station 6 for 25 min.
Press:
(The display shows station and watering time. As time elapses, watering time will count
down. When time ends, the station shuts off. The controller goes back to the Automatic
Mode.)
To stop the watering station
Press:
The controller goes back to the Automatic Mode.
Note: If a pump is assigned to any program (via Setup) then Station 1 is reserved for the
pump, but it can still be turned on manually by specifying Station 1.
Note: If the Master Valve type is Normally Closed (as specified via Setup) then the Master
Valve will come on with the station. If the station being turned on is in any program that
41
QUIT
PROGRAM
ENTER
MANUAL
SUN
1
MANUAL
CLEAR
MANUAL STATIONS
ENTER
MON
2
FRI
6
THU
5
ENTER
QUIT
MAN
UAL
FU
N
CTI
O
N
S