Maintenance
400-294-002
Rev. Date: 01/07
3-25
To replace the fuses, perform the steps below. Perform these steps with the machine in
the
operating
position.
Tools Needed:
•
Phillips screwdriver
•
Medium flat screwdriver
Refer to Drawing Number:
294-115-109
1.
Remove the two screws on each side
of the hood, as shown in Figure 3-23,
and lift the hood off the frame. Set
aside the screws.
2.
Remove the top and front screws of the
top panel of the control enclosure, as
shown in Figure 3-24 (arrows). Set
aside the screws.
3.
Remove the three screws on either one
of the side panels of the control
enclosure, as shown in Figure 3-24
(circled). Set aside the screws.
Figure 3-23
Figure 3-24
Summary of Contents for Express 294-115-200
