Maintenance
400-294-002
Rev. Date: 01/07
3-17
Tools Needed:
•
Medium flat blade screwdriver
•
Ratchet and 1/2 socket or 1/2 wrench
Refer to Drawing Number:
•
294-115-053, View C
•
294-115-095
1.
Remove the two screws, shown in
Figure 3-15, from both sides of the
hood and lift the hood from the frame.
Set aside the screws.
2.
Loosen the screw on the vacuum hose
clamp and remove the vacuum hose
from the Vac Head.
3.
Remove the two 5/16 nuts to release
the Vac Head from the machine, as
shown in Figure 3-16, and remove the
Vac Head from the
bottom
of the
machine.
4.
Remove the six #10 screws from the Vac Head to release the agitator foam and
clamps, and set them aside.
Figure 3-15
Figure 3-16
Summary of Contents for Express 294-115-200
