Operation
400-294-002
Rev. Date: 01/07
2-11
2.6 CLEANING
OPERATION
COMPONENTS
The components used in the cleaning operation are shown in Figures 2-10 and 2-11, and
described below.
ID Component
Description
1 Cleaner
Tank
(Figure 2-10)
This tank holds the cleaner. It holds enough cleaner to
clean a minimum of 12 lanes. Because the tank is
designed to not drip when the machine is tipped into its
the storage position, you can leave cleaner in the tank.
2 Spray
Heads
(Figure 2-10)
The three spray heads distribute the cleaner on the lane.
The spray head pattern is set to overlap and to distribute
more cleaner in the areas where the oil pattern is
thicker.
The spray head positions can not be adjusted.
Refer to the Troubleshooting section for information
about how to clear clogs and how to change the amount
of cleaner dispensed from the spray heads.
3 Vacuum
Hose
(Figure 2-10)
This flexible tube is used to transport the residue from
the Vac Head to the waste tank.
The hose slips onto the waste tank inlet tube. This slip
fitting makes it easy for you to take off the hose when
you remove the waste tank.
Figure 2-10
2
3
1
4
Summary of Contents for Express 294-115-200
