Express Lane Machine Operation, Maintenance, and Parts Manual
2-6
Rev. Date: 01/07
400-294-002
ID Control
or
Display
Description
9 BUFF
DIST
©
Up Arrow
ª
Down Arrow
These touch sensitive buttons are used to scroll up and
down through numbers to specify where the machine is to
stop and resume buffing.
This setting must be equal to
or larger than the OIL DIST setting.
When the machine is moving toward the pin deck, the
setting is the number of feet from the approach at which the
machine is to
stop
buffing. When the machine is moving
toward the approach, the setting is the number of feet from
the approach at which the machine is to
resume
buffing.
The numbers are displayed in the Buff Dist window.
The Express remembers the distance used in the last lane
conditioning session and assumes that distance when you
next start up the machine.
10 Buff Dist
This window displays the distance, in feet from the
approach, that will be buffed.
2.3 PUTTING THE EXPRESS LANE MACHINE INTO POSITION
The Express Lane Machine has two positions, operating and storage. The machine must
be in the operating position, shown in Figure 2-3, to perform any of its operations.
Though you can move and store the machine in the operating position, we recommend that
you tip it into the storage position, as shown in Figure 2-4.
Figure 2-3
Summary of Contents for Express 294-115-200
