![QubicaAMF Express 294-115-200 Operation, Maintenance And Parts Manual Download Page 13](http://html1.mh-extra.com/html/qubicaamf/express-294-115-200/express-294-115-200_operation-maintenance-and-parts-manual_3559255013.webp)
Introduction
400-294-002
Rev. Date: 01/07
1-3
Use only cleaners specifically manufactured for use on
bowling lanes.
Waste Tank Capacity
Holds waste for 12+ lanes when a defoamer is used.
Oil Tank Capacity
40 ounces (enough to condition 24 lanes).
Use only oil products specifically manufactured for use
on bowling lanes.
Foams:
Standard
Alternates
Outside - 3-1/4 inches H x 11 inches L
Middle - 3-1/4 inches H x 20 inches L
3-1/4 inches H x 48 inches L
1.2 UNPACKING THE EXPRESS LANE MACHINE
Before you first use the Express Lane Machine, you should ensure all the components
were shipped and that they arrived in good condition. We also strongly suggest you
familiarize yourself with how to operate the machine.
IMPORTANT
The oil transfer roller is tied in place to prevent damage during shipment. You must
complete the steps below before using the machine or you will damage the machine.
1.
Open the clasps on the back of the machine and open the oil tank compartment
door.
2.
Cut the plastic wire tie and remove the red tag.
3.
If the silver roller (oil transfer roller) does not drop down against the buffer
brush, gently push it down to rest against the buffer brush. Do not force it.
4.
Close the oil tank compartment and refasten the clasps.
The following table lists the contents of the Express Lane Machine package.
Item Part
Number
Express Lane Machine
294-115-200
Power Cord
294-002-359
Large Red Funnel (for cleaning solution)
RP-115
Small Red Funnel (for oil)
RP-42
Quick Start Information
400-294-003
Summary of Contents for Express 294-115-200
