Operation
400-294-002
Rev. Date: 01/07
2-3
The Express is propelled by the drive motor. When cleaning the lanes, the drive motor
propels the machine until the end of the lane is reached, then it reverses direction and
propels the machine back to the approach. When only conditioning the lanes (no cleaning)
or only buffing the lanes, the drive motor propels the machine until the buffing distance is
reached, then it reverses direction and propels the machine back to the approach.
2.2 THE EXPRESS LANE MACHINE CONTROLS
You control the operations of the Express Lane Machine by selecting options and
specifying information on the control dashboard, shown in Figure 2-2. This section
describes the control dashboard and how to use it.
The controls and information displays on the control dashboard are described below. The
recommended start-up sequence is given in the Cleaning And Conditioning The Lanes
instructions later in this section.
ID Control
or
Display
Description
1 Power Inlet
This blue inlet is where you connect the power cord.
To ensure you properly and safely connect the power cord,
the large, blue plug is designed to fit into the inlet in only
one way.
The machine must be plugged only into a grounded, 110-
volt outlet. Have your center manager show you the
outlet(s) to use.
2 POWER Switch
This rocker switch is the circuit breaker for the Express. It
turns power on and off to the machine and provides
overcurrent (30 amp) protection.
This switch does not start any of the operations.
Figure 2-2
6
8
10
2
9
7
1
3
4
5
11
Summary of Contents for Express 294-115-200
