Operation
400-294-002
Rev. Date: 01/07
2-19
2.10 CLEANING AND CONDITIONING THE LANES
The Express Lane Machine was designed to start up with the settings from the last time
you used the machine. This feature means you can repeat your lane cleaning and
conditioning settings without having to re-enter them every time you use the machine.
NOTE
We strongly suggest you dust the lanes before cleaning them. Dusting the lanes will
prolong the life of the foams and squeegees, and ensure quality results.
IMPORTANT
Ensure the pinspotters are turned off for the lanes you are conditioning
When you first use the Express, the cleaning, oiling, and buffing operations will be turned
on, the oiling distance will be 24 feet, and the buffing distance will be 39 feet. These
distances are an average of the most common oiling and buffing distances. You can use
these settings and distances or you can enter your own.
•
To only clean the lanes, turn
off
the oiling and buffing operations.
•
To only buff the lanes, turn
off
the oiling and cleaning operations.
•
To enter oiling and buffing distances, press the up and down arrow buttons for
each operation until the window displays the distance you want. The distance
you are setting is the number of feet from the approach.
BUFFING
NOTES
The redistributed oil will only approximate the oil pattern that is put down when oil is
applied to the lanes.
Because you are using the existing oil on the lane,
do not clean the lanes
before
performing this operation.
OILING NOTE
The machine is sent with wicking foams that provide the optimal lane conditioning for
most centers. This factory-set pattern can be altered by many factors, such as
wicking foam output, oiling and buffing distances, and type of oil being used. For
information about changing the oil pattern, refer to Appendix A - Determining Your
Oiling Pattern.
Summary of Contents for Express 294-115-200
