Operation
400-294-002
Rev. Date: 01/07
2-21
2.10.2 Cleaning And Conditioning The Lanes
The following table lists all the steps you perform to clean, oil, and buff a lane. Skip any
steps that do not apply to the operation(s) you are performing.
The left-hand column shows
C
- for cleaning,
O
- for oiling, and
B
- for buffing, to indicate
what operation the step is performed for.
C O
Check the cleaner and oil tank levels. Add cleaner and oil as needed.
C
Pour defoamer into the waste tank.
C O B
Place the machine into the starting position.
C O B
Plug the power cord into a 110-volt outlet.
C O B
Insert the large, blue plug into the power inlet on the machine and secure the
cord to the handle.
C O B
Press the POWER rocker switch to ON.
The internal distance counter resets to zero.
C
Check that the Cleaner indicator is green. If it is not, press the CLEAN button.
B
(
O
)
Check that the Buff indicator is green. If it is not, press the BUFF button.
Because the buffing operation affects the oiling operation, you should set your
buffing specifications first.
B
(
O
)
Verify that the buffing distance is the correct. If it is not, set the distance you
want.
The buffing distance number must be higher than the oiling distance number.
O
Check that the Oil indicator is green. If it is not, press the OIL button.
O
Verify that the oiling distance is correct. If it is not, set the distance you want.
The buffing distance number must be equal to or higher than the number you
select here. The Express will not allow you to set an oiling distance number
that is higher than the buffing distance number.
C O B
Press the START button (on the control dashboard) or the START button (on
the handle)
once
.
When you press the START button the first time, the Express performs the following
actions:
Summary of Contents for Express 294-115-200
