![background image](http://html2.mh-extra.com/html/quantum/px500-series/px500-series_user-manual_3547730239.webp)
Appendix C Installing the PX502 Library
Installing the Library
Quantum PX500 Series User’s Guide
216
a
Insert the tape drive into the drive bay slowly until the
connectors are seated (see
).
Figure 113 PX502 Tape Drive
Numbering
b
Tighten the tape drive captive screws using a flat blade
screwdriver.
c
Repeat these steps to install another tape drive in a different
location, if desired.
The library chassis is installed in the rack.
Cabling the Library
3
Connect the SCSI cables and jumpers as shown in the following figure:
•
SCSI System Controller Board
•
Surrogate SCSI System Controller Board
•
Fibre Channel System Controller Board
•
PX502 Stacked Configuration
Tape
drive 2
Tape
drive 1