![background image](http://html2.mh-extra.com/html/quantum/px500-series/px500-series_user-manual_3547730226.webp)
Appendix C Installing the PX502 Library
Preparing for the Installation
Quantum PX500 Series User’s Guide
203
Environmental
Conditions
3
Refer to
on page 189 for environmental condition
information.
Preparing for the Installation
Before you begin the installation procedure in this section, make the
following preparations as described in this section:
•
Providing Necessary Tools and Equipment
•
Providing Necessary
Tools and Equipment
3
Provide the following tools for installing the PX502 library:
• 3 mm Allen wrench
• 2.5 mm Allen wrench
• #1 flat blade screwdriver
• Antistatic wrist strap included in accessory kit
Taking ESD Precautions
3
Some components within the PX502 library contains static-sensitive parts.
To avoid damaging these parts while performing installation procedures,
always observe the following precautions:
• Keep the library turned off during all installation procedures.
• Use an antistatic wrist strap (included in the accessory kit).
• Keep static-sensitive parts in their original shipping containers until
ready for installation.
• Do not place static-sensitive parts on a metal surface. Place them
inside their protective shipping bag or on an antistatic mat.