background image

Chapter 2  Basic Library Operations

OCP Components

Quantum PX500 Series User’s Guide

71

If a match is found, the cartridge type and location displays. 

3

If more than one match is found, a list of matching cartridges 

displays. Select the tape cartridge from the list and press 

Enter

.

The tape cartridge type and location displays.

Move Tape

2

To view the move tape screen:

1

From the 

Ops

 screen, use the up and down arrows to highlight 

Move 

Tape

 and press 

Enter

.

The 

Move From

 screen displays (see 

figure 46

):

Figure 46  Move From Screen

To move a tape cartridge within the library:

2

Use the up and down arrows to select a magazine, tape drive, or fixed 

slot group and press 

Enter

.

The 

Move from

 screen displays a list of storage bins within the 

selected magazine, tape drive, fixed slot group, and hand/top 

passthru.

3

Use the up and down arrows to select a tape cartridge from an 

occupied bin and press 

Enter

.

Note:

If this is a master library in a multiple library stack, you 

cannot move cartridges from one library into another. You 

can only move cartridges manually from one library into 

another via the remote management pages (see 

chapter 3

 

on page 85).

Summary of Contents for PX500 Series







































































































































































































































































































Reviews: