Quantum PX500 Series User Manual Download Page 164

Page: 164 / 294

Chapter 3 Quantum PX500 Series Remote Management

Utilities

Quantum PX500 Series User’s Guide

141

Reboot Library

The

Reboot Library

button allows you to remotely reboot the library.

To reboot the library:

Click

Reboot

The library reboots.

Park for Shipping

The

Park for Shipping

button allows you to remotely park the robot for

library shipment. This places the library gripper in the correct position for

shipment and powers down the library,

HOWEVER

, you must place the

library shipping restraints on the library gripper prior to shipping the

library. Refer to

appendix D

on page 229 for more information on

shipping the library.

To park the library gripper:

Select the cabinet and click the

Park

button.

The library gripper moves to the shipment position.

Fibre Channel Bridge Rescan

The Fibre Channel bridge rescan button re-discovers any FC bridges

installed in the cabinet. Details of the scan will be presented under

Bridge

tab.

To rescan Fibre Channel bridges installed in the cabinet:

Click

Rescan

The Fibre Channel bridges are scanned.

Note:

You must remove all tape cartridges from the library prior to

parking the library robotics for shipment.

Caution:

Shipping the library without installing the library gripper

shipping restraints may result in damaging the gripper.

Summary of Contents for PX500 Series







































































































































































































































































































Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands

Quantum PX500 Series, User Manual

Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands