Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide
122
1
To access the
Date & Time
page, from the
Setup
page, click on the
Date
& Time
tab at the top of the page.
The
Date & Time
page displays (see
).
Figure 81 Date & Time Page
2
Select
Manual
to manually set the system date and time using the
Change
button for the system date and drop down boxes for the
system time.
3
Click
Save
when complete.
The Quantum PX500 Series will not use the new date and time zone
information until it has been rebooted.
Library
3
The library configuration section allows the user to configure automatic
library settings.
1
To access the
Library
page, from the
Setup
page, click on the
Library
tab at the top of the page.
Note:
The library must be offline to change the library settings.
