Quantum PX500 Series User Manual Download Page 188

Page: 188 / 294

Chapter 4 SNMP Trap List

Quantum PX500 Series User’s Guide

165

XY Axis Jammed

The portion of the robotics that

moves the XY axis can not move

its respective motor.

Warning

Servo

XY Axis Position Lost

The portion of the robotics that

moves the XY axis can not move

its respective motor to the

expected internal limits.

Warning

Servo

XY Axis Retry

The portion of the robotics that

moves XY has exceeded internal

retries.

Warning

Servo

XY Axis Stalled

The portion of the robotics that

moves the XY axis can not move

its respective motor to the

expected internal limits.

Warning

Servo

XY Axis Timeout

The portion of the robotics that

moves XY could not position

within its allotted time.

Warning

Servo

Z Axis Jammed

The portion of the robotics that

positions Up and Down can not

move its respective motor.

Warning

Servo

Z Axis Position Lost

The portion of the robotics that

moves the Up/Down axis can not

move its respective motor to the

expected internal limits.

Warning

Servo

Z Axis Retry

The portion of the robotics that

moves Up and Down has

exceeded internal retries.

Warning

Servo

Z Axis Stalled

The portion of the robotics that

moves the Up/Down axis can not

move its respective motor to the

expected internal limits.

Warning

Servo

Z Axis Timeout

The portion of the robotics that

moves Up and Down could not

position within its allotted time.

Warning

Servo

Event Detail

Event Description

Category

Reported By

Summary of Contents for PX500 Series







































































































































































































































































































Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands

Quantum PX500 Series, User Manual

Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands