![background image](http://html2.mh-extra.com/html/quantum/px500-series/px500-series_user-manual_3547730058.webp)
Chapter 1 Library Description
Getting Started
Quantum PX500 Series User’s Guide
35
Getting Started
This chapter describes the procedures necessary to get your Quantum
PX500 Series up and running. Have the following equipment and
accessories available before installing the library:
• SCSI cables to support 1 host bus adapter (HBA) per two tape drives
• HBAs in the host
• 2 tape drives per SCSI bus)
• Power source (see
on page 189 for power requirements)
• Tape cartridges (LTO and/or SDLT)
After the Quantum PX500 Series is in it’s final location, the following
steps are required to complete the installation:
•
Installing the Quantum PX500 Series
•
Cabling the Quantum PX500 Series
•
•
Installing the Quantum
PX500 Series
1
The PX500 Series library modules fit into a standard 19-inch wide rack.
Refer to
for rack space requirements. Complete
mounting information is provided in the
Quantum PX502 Series Quick
Start
(PN 81-81292-01 A01) and the
Quantum PX506 and PX510 Unpacking
and Installation Instructions
(PN 81-81338-01_A01).
*.The values in the
# of Cartridges
and
Capacity
columns assume that all the magazines and fixed cartridge
slots are fully populated with data cartridges.
†
Compressed values assume 2:1 compression ratios.
Note:
SDLT 600, DLT-S4, and LTO-3 tape drives require a
dedicated SCSI bus for each tape drive (1 tape drive per
SCSI bus).