Quantum DXi4500 User Manual Download Page 83

Page: 83 / 226

Chapter 5: DXi4500 Configuration

NAS & OST Configuration

Quantum DXi4500 User’s Guide

Figure 17 Delete NAS Shares
Page

Select the NAS share to delete.

Click

Apply

to delete the selected NAS share.

The NAS share is deleted.

OST Configuration

Use the OST (Open Storage Technology) page to configure storage
servers and also LSUs (Logical Storage Units).
To access the

OST

page:

From the

NAS & OST

page, click the

OST

tab.

Note:

Ensure that the system is online before continuing with the

OST configuration

The

OST

page contains the following tabs:

•

Storage Servers

•

LSUs

•

OST Client Plug-In

Summary of Contents for DXi4500



































































































































































































































Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands

Quantum DXi4500, User Manual

Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands