Quantum DXi4500 User Manual Download Page 147

Page: 147 / 226

Quantum DXi4500 User’s Guide

125

Chapter 7

DXi4500 Alerts

Use the

Alerts

page to view administrator alerts (admin alerts) and

service tickets. These alerts are generated by the system when hardware

or software events have occurred.
To access the

Alerts

page, from the contents frame, click the

Alerts

menu.
The

Alerts

page contains the following tabs:

•

Admin Alerts

•

Service Tickets

Admin Alerts

Admin alerts are generated by the system when the condition of the

system has changed, such as going from the offline state to the online

state.

Note:

You must complete e-mail configuration (see

Configuration

on page 98) before administrator alerts can be

sent.

To access the

Admin Alerts

page:

Summary of Contents for DXi4500



































































































































































































































Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands

Quantum DXi4500, User Manual

Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands