manualshive.com logo in svg

Quantum DXi4500, User Manual, Page: 201 / 226

Share
Download
Quantum DXi4500 User Manual Download Page 201

Quantum DXi4500 User’s Guide

179

Chapter 11

Implementing a Data 

Replication Plan

The DXi4500 can be used as part of your disaster recovery plan through 

its built-in data replication capability. Data replication is used to create 

another copy of your data on a remote DXi4500 system. In the event of 

a disaster where the original data was lost, the replicated data can be 

quickly recovered from the remote system allowing your business to 

resume normal operations.
The following sections provide information on setting up data 

replication and also recovering replicated data:

•

Setting Up Data Replication

•

Recovering Replicated Data

Setting Up Data Replication

Note:

The information in this section applies to native DXi4500 

replication. OST optimized duplication using NetBackup is 

described separately (see 

OST Optimized Replication

 on 

page 70).

Setting up data replication on the DXi4500 consists of the following 

steps (see 

Figure 74

):

Summary of Contents for DXi4500



































































































































































































































Reviews:

No comments