Quantum DXi4500, User Manual

Page: 206 / 226

Chapter 11: Implementing a Data Replication Plan
Setting Up Data Replication
184 Quantum DXi4500 User’s Guide
Figure 78 Source Role NAS
Settings Page
4 Select Enable Replication to enable replication.
5 To schedule a replication time, select Enable scheduled replication
and enter the date and time to run the replication process.
Note: Replication should be scheduled to run after backups are
complete. If you do not enable scheduled replication,
replication will only occur if you manually run it or if you
configure Directory/File Based Replication (see
Source Role
NAS Directory/File Based Replication Configuration on
page 145).
6 Click Apply .
The Source Role NAS page displays (see Figure 77 ).
7 To manually run the replication process, select the NAS share and
click
Replicate Now .
The NAS share is replicated from the source system to the target
system. To pause or resume the replication process, see
Source Role
Configuration on page 140.