Quantum DXi4500, User Manual

Page: 170 / 226

Chapter 8: DXi4500 Data Services
Target Role Configuration
148 Quantum DXi4500 User’s Guide
• Click Disable to disable replication for all deduplicated NAS shares.
Note: If you click Disable during a replication in process, the
system will complete the entire replication and then disable
replication on the system. The system will be unable to
replicate until you click Enable .
Note: To disable replication for a single share, select the share on
the Source Role NAS page and click Edit . Clear the Enable
Replication and the Enable scheduled replication check
boxes, then click Apply . For more information, see Source
Role NAS Configuration on page 142.
Source role performance data includes statistics gathered while
replicating or failing back shares to target systems.
• To clear these statistics, click Clear .
Target Role Configuration
Use the
Target Role
page to define up to 10 source systems that the
target can accept replicated data from. The
Target Role
page is also
used to perform actions upon replicated NAS shares that have been
received. The source systems must be defined in the
Target Role
page
prior to defining the target systems in the
Source Role
page.
To configure the target system for replication:
1
From the
Replication
page, click the
Target Role
tab.
The
Target Role General
page displays (see Figure 58 ).