![background image](http://html1.mh-extra.com/html/quantum/dx100/dx100_unpacking-and-installation-instructions_3534091020.webp)
Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
20
Installing the DX-Series System
Figure 14 Installing the
Hard Drive Sleds
The DX-Series storage array is now installed in the rack. If this is a DX30
installation, continue with
Installing the DX-Series Controller
on page 27.
If this is a DX100 installation, continue with
Installing the Fibre Channel
Switch (DX100 Only)
.
Installing the Fibre
Channel Switch
(DX100 Only)
0
To install the Fibre Channel switch, refer to the Fiber Channel switch
hardware described in
table 4
and the following instructions:
Storage Array Drive Bay Numbering
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Note:
The Fibre Channel switch may be slightly different from the switch
documented in this procedure. The installation procedure should
be similar.
Drive sled 1
Drive sled 2
Drive sled 3
Drive sled 4
Locking screw
Door latch