Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Configuring the DX-Series System
75
3
To add a SSL certificate, click
New
.
The
Install SSL Certificate
page displays (see
figure 63
).
Figure 63 Install SSL
Certificate Page
4
Under
Upload Your SSL certificate file
, type the location and filename of
the new SSL certificate file.
5
Click
Upload
to install the SSL certificate file.
6
Type your private key and press
Enter
.
7
Type your pass phrase and press
Enter
.
8
A
Successful Upload
page displays indicating that the SSL certificate file
has been installed on the system. Click
Ok
to continue.
The certificate displays in the certificate area on the SSL page.
Configuring the Fibre
Channel Settings
0
The DX-Series system allows you to control and configure the Fibre Channel
HBAs that reside in the controller.
To configure the
Fibre Channel
page:
1
In the
Configuration
page, click
Fibre Channel
.
The management frame displays the
Fibre Channel
page (see
figure 64
).
Note:
Use the
Browse
button to browse the system and locate the
desired SSL certificate file. The SSL certificate file must be
named
server.crt
.