![background image](http://html1.mh-extra.com/html/quantum/dx100/dx100_unpacking-and-installation-instructions_3534091065.webp)
Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Configuring the DX-Series System
65
Connecting the Service PC to the Network
0
1
Connect the service PC to the network switch on the same subnet as the
DX-Series controller with an Ethernet cable.
2
On the service PC, open the Internet browser software.
3
In the
Address
field, enter the DNS name or IP address configured in
Configuring User Options
on page 59.
The
Log In
screen displays (see
figure 53
):
Figure 53 Log In Screen
Note:
You can also directly connect the service PC to Eth0 on the
DX-Series controller using a cross-over cable.
Note:
If Internet Explorer is the default browser on the client system:
•
The latest security updates for Microsoft VM (virtual
machine) must be installed on the client system.
•
The security settings must be set no higher than
“medium”. If the settings are set to “high security”, the
browser will not be able to login to the DX-Series system
since the system needs write access to the client.
•
The “Play animations in web pages” item in the Internet
Options/Advanced/Multimedia menu must be enabled.