![background image](http://html1.mh-extra.com/html/quantum/dx100/dx100_unpacking-and-installation-instructions_3534091070.webp)
Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
70
Configuring the DX-Series System
7
Enter the number of empty bins available in addition to the number of
cartridges created in the partition. The default number of empty bins is 0
and up to 28 empty bins can be selected.
8
Select the number of tape cartridges from the
Available Tape Cartridge
list
and click the right arrow button to move the cartridges into the partition.
9
Click
Apply
to create the partition.
Map the Fibre Channel ports as described in
Configuring the Fibre
Channel Settings
on page 75.
10
Return the DX-Series system to the online state from the
Utilities
page.
The partition is added to the partition list. To add another partition,
repeat this procedure.
Configuring the
Network Information
0
If you have not configured the network information, configure the network
information via the following web pages:
1
To access the
Network Configuration
page, from the
Configuration
page,
click
Network
.
The management frame displays the
Network Configuration
page (see
figure 59
).
Note:
If all tape cartridges are assigned to other partitions, you must
unassign one or more tape cartridges to make them available
for a new partition. Be aware that all cartridges that were
created at the time of installation are assigned to the Default
partition.
Note:
For more information on adding, editing, or deleting a
partition, see the
DX-Series User’s Guide
(PN 6513501).