![background image](http://html1.mh-extra.com/html/quantum/dx100/dx100_unpacking-and-installation-instructions_3534091054.webp)
Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
54
Configuring the DX-Series System
Power Cabling
0
The procedure for connecting the power cables differs depending on the
DX-Series system being installed. Refer to the following sections for your
particular installation:
•
DX30 Power Cabling
•
DX100 Power Cabling
DX30 Power Cabling
0
The DX30 system does not require any additional power supply equipment.
Simply connect the DX30 system AC power connectors (two for the controller
and two per storage array) to available grounded outlets using the power
cords supplied in the accessory kits.
DX100 Power Cabling
0
The DX100 system requires additional AC power sequencers to provide
power to the system.
• Two AC power sequencer are required for one to four storage arrays.
• Four AC power sequencers are required for five to eight storage arrays.
• Six AC power sequencers are required for nine to twelve storage arrays.
• Eight AC power sequencers are required for thirteen to sixteen storage
arrays.
See
Cabling and Installing the AC Power Sequencer
on page 32 for
information on DX100 power cabling.
Configuring the DX-Series System
0
After all components of the DX-Series system are installed in the rack, the
controller must be configured with network information.
Configuring the DX-Series system consists of the following steps:
•
Turning On the DX-Series System
•
Initially Configuring the DX-Series System
•
Accessing the DX-Series Controller
•
Adding a Partition
•
Configuring the Network Information
•
Configuring the Date and Time
•
Configuring the Security Options
•
Configuring the Fibre Channel Settings
•
Configuring the Email Settings