Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
72
Configuring the DX-Series System
1
In the
Configuration
page, click
Date & Time
.
The management frame displays the
Date & Time Configuration
page (see
figure 60
).
Figure 60 Date and Time
Configuration
2
There are two options for setting the system date and time:
a
Select
Manual
to manually set the system date and time using the
Change
button for the system date and drop down boxes for the
system time.
b
Select
Use NTP
(Network Time Protocol) to synchronize the
DX-Series system clock to the U.S. Naval Observatory Master Clocks
in Washington, DC and Colorado Springs, Colorado. NTP sends
periodic time requests to the DX-Series system, obtaining time stamps
and using them to adjust the client's clock.
3
Select the appropriate time zone from the Timezone drop down box.
Configuring the
Security Options
0
To access the
Security
page:
1
In the
Configuration
page, click
Security
.
The management frame displays the
Security
page (see
figure 61
).
