DLT4000 SCSI Interface
8-90 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
8.4.11 PREVENT/ALLOW MEDIUM REMOVAL (1Eh)
Bit
7
6
5
4
3
2
1
0
0
Operation Code (1Eh)
Logical Unit Number
Reserved
Reserved
Byte
Reserved
4
Prevent
5
Reserved
Flag
Figure 8 56
This command enables or disables the unloading of the tape cartridge.
If this bit is set, the Unload button on the drive front panel is effectively disabled, and
the UNLOAD command will not unload the media or the cartridge. The
When the Prevent bit is set to zero, then the Prevent state corresponding to that
initiator is cleared. Only when all initiators have cleared their Prevent state are the
reset, or Bus Device Reset message, the Prevent Medium Removal function is cleared.
If a Media Loader is present, the Move Medium command will not be allowed to
Summary of Contents for DLT 4700
