Quantum DLT 4700, Product Manual, Page: 70 / 360

Configuring and Operating the DLT4000 Basic Tape Drive
3-24 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
3.9 Unloading a Cartridge
_________________________ CAUTION _________________________
Remove a cartridge from the drive before turning off host system power.
Failure to remove a cartridge can result in cartridge and drive damage.
When you remove the cartridge from the drive, return the cartridge to its
plastic case to prolong the cartridge life.
___________________________________________________________
To unload a cartridge from the drive (Figure 3-9):
1. Press the Unload button (or issue the appropriate system software command). The
yellow Tape in Use indicator blinks as the tape rewinds.
2. When the green indicator turns on (the beeper also sounds), pull the cartridge
insert/release handle open to eject the cartridge.
_________________________ CAUTION _________________________
Immediate extraction of the tape cartridge can lead to tape leader failure.
Delay tape cartridge extraction by one to two seconds to avoid this
problem.
___________________________________________________________
3. Remove the cartridge.
4. Push the handle closed.