Configuring and Operating the DLT4700 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 5-21
5.9 Magazine
The front of the magazine has numbers, 0 through 6, that indicate the number of the
slot.
_________________________ NOTE ____________________________
Insert and remove all cartridges at the front of the magazine.
___________________________________________________________
5.9.1 Inserting a Cartridge into the Front of the Magazine
To simplify cartridge insertion: place the magazine on a flat surface with the slots
facing you (Figure 5-4). Each slot is numbered to ensure you are inserting the
cartridge correctly in the front of the magazine. Usually, cartridges are inserted into
consecutive slots.
To insert a cartridge into the magazine:
1.
Grasp the cartridge with the write-protect switch on the right side facing you
(Figure 5-3).
2.
Set the cartridge's write-protect switch to the desired position.
If you want to
…
…
Then
…
…
Write to the tape
Slide the switch to the right (orange indicator is not
visible)
Write-protect the tape
Slide the switch to the left (orange indicator is
visible)
3. Insert the cartridge (Figure 5-4) by pushing it into the slot until you hear a click.
A small metal tab holds the cartridge in place.
Summary of Contents for DLT 4700
