Quantum DLT 4700, Product Manual

Page: 85 / 360

Configuring and Operating the DLT4500 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsytem 4-13
Table 4-2 lists each button and its function.
Table 4-2 Mini-Library Operator Control Panel
Button Function
Display Mode The Display Mode button allows the user to select
Normal, Density Select, SCSI ID Select mode, or
Firmware Update Mode. Normal Mode is the
default setting after either mini-library power-up
or mini-library reset.
Select
•
Selects SCSI ID and density.
•
Moves in increments the current slot number
on the display to the next slot number .
Load/Unload
•
Loads the currently selected cartridge into the
tape drive
•
Unloads the cartridge currently in the tape
drive
•
Resets the mini-library if a loader error has
occurred. When the ERR LDR message
displays, press the Load/Unload button to reset
the mini-library.
Open
•
Opens the magazine door to access the
magazine for loading and unloading
cartridges.
•
Unloads the cartridge currently in the tape
drive and returns the cartridge to its original
slot. Then, opens the magazine door.