501510 Rev. S
The Maintenance Menu
4-7
•
FW Rev
This value identifies the firmware revision.
•
Loader Rev
This value identifies the loader revision.
•
Prod. Id.
This value identifies the product model name.
•
S/N
This value identifies the board serial number.
•
+3.3V
This value displays the +3.3V regulator output.
•
+5V
This value displays the +5V regulator output.
•
+2.5V
This value displays the +2.5V regulator output.
•
Air Temp
This value displays the board’s temperature in degrees Celsius.
•
CPU Temp
This value dis
plays the CPU’s temperature in degrees Celsius.
•
UPDATE command
This menu item is visible when communications to the Fibre Channel IPM is
in an idle state. Invoking this command will cause the Fibre Channel IPM to
update the configuration and environmental information.
It takes approximately 35 seconds to obtain new information after the
UPDATE
command has been invoked.
Summary of Contents for RLS-4470
