501510 Rev. S
RLS Expansions
9-1
9.
RLS Expansions
DANGER
TO AVOID THE RISK OF PERSONAL INJURY: TURN OFF ALL POWER TO THE
TAPE LIBRARY SYSTEM, THEN REMOVE THE POWER CORD, BEFORE
ATTEMPTING ANY OF THE PROCEDURES IN THIS CHAPTER.
NEVER OPERATE THE LIBRARY WHILE THE DOOR OR TOP PANEL ARE OPEN.
GEFAHR
UM VERIETZUNGEN ZU VERHINDEM: SCHALTEN SIE ALLE STROMSCHALTER
AN DER RLS AUS UND ENTFERNEN SIE DAS STROMKABEL, BEVOR SIE MIT
DER SERVICE-ARBEIT BEGINNEN.
BENUTZEN SIE DIE RLS NIE WENN DIE TUERE OFFEN IST, ODER DIE DECK-,
BZW. SEITENPLATTE ENTFERNT SIND.
9.1
Introduction
This chapter contains installation instructions for the RLS expansion kit, which al-
lows for an RLS-4445 to be expanded to an RLS-4470. To replace an existing FRU
(Field-Replaceable Unit), follow the instructions in Chapter 7.
Installing or removing an expansion kit changes the configuration of a unit. There-
fore, after an expansion kit is installed, the unit must be reconfigured and recalibrat-
ed.
Summary of Contents for RLS-4470
