quadient iX-1 Series, User Manual

Page: 65 / 280

How to Set [Redate] Mode printing
If you have a mail piece that has been stamped with a date that is not the actual date
you are mailing the piece, you must “Redate” the mail piece before mailing. Redating
is done by applying a “0” value date correction indicia (stamp) to the envelope / item.
• USPS postal regulations state that the indicia (stamp)
must show the actual date the mail is deposited with the
post office. The post office may return mail if the correct
date is not on the indicia.
• Only one date correction indicia (stamp) is permitted.
• On letter size mail, place the date correction indicia (stamp)
on the non-address side of the envelope in the upper right
corner.
• If the date stamp is printed on a label, it may be placed
on the address side of the envelope in the lower left corner.
Required settings:
1.
Make sure you are on the home screen of the [Redate] type of stamp.
The type of stamp is indicated at the top of the home screen as illustrated.
60
| Page 60 | Jan-27-2023 01:28 |
3
Processing
Mail