quadient AS-Orbit User Manual Download Page 36

Page: 36 / 224

User Manual Version 3.1

Below is an explanation of how the different secondary functions of the arrow keys work:

Quick key

Secondary key function

Arrow up (Test Print)

The printer will ask you from which source you want
to supply material for the test print. You have to
choose between

Manual

Feeder

and

Cancel

(Short) The printer will display

Test

and print the test

pattern once, using the current printer setting (e.g.
print quality).

(Long) The printer will display

Test

and print the test

pattern continuously, using the current printer setting
(e.g. print quality). To stop, hit the Cancel (Offline)

key.

Arrow right (Paper Length)

The printer will ask you from which source you want
to supply material for the measurement. You have to
choose between

Manual

Feeder

and

Cancel

(Short) The printer will display

PAPER WIDTH:

, feed

one page and measure the size of the page. The
measured size will be shown in the display.

(Long) The printer will display

PAPER WIDTH: (L)

feed one page and measure the size of the page. The
measured size will be shown in the display. The

(L)

indicates that the measured page size will be locked in
the printer, so that the page size cannot be changed
from a PC program.

Arrow down (Clean Heads)

The printer will ask you from which source you want
to supply material for the test print. You have to
choose between

Manual

Feeder

and

Cancel

The printer will feed one page and print a pattern of
bars, using the currently set page size.

Arrow left (Run Paper)

(Short) The printer will display

PapRUN

and feed one

page and transport it, using the current printer setting
(e.g. transport speed).

(Long) The printer will display

PapRUN

and feed and

transport pages continuously, using the current
printer setting (e.g. transport speed). To stop hit the
Cancel (Offline)

key.

This is an useful function to check if, the separation
and the material transport of the printer, are setup
correctly.

Pos: 51 /Bedienungsanleitungen/Geräte spezifisch/Drucker/4.4.2_Ü3_Main_Display @ 1\mod_1261142768887_912.doc @ 9017 @

Summary of Contents for AS-Orbit

































































































































































































































Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands

quadient AS-Orbit, User Manual

Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands