quadient AS-Orbit User Manual Download Page 202

Page: 202 / 224

202

User Manual Version 3.1

11.11

How to position the encoder wheel mounting

If the position of the encoder wheel mounting has to be shifted due to modifications or
repairs, the default settings have to be restored.

Figure 92: Sample position of the encoder wheel on the belt (schematical)

The encoder wheel should be installed in such a way that it can roll
unimpeded on the conveyor belt. The encoder wheel should be

installed close to the first print unit.
The print media must not collide with the encoder wheel. The encoder

wheel can get damaged and the printouts may be faulty.

The illustration of Figure 92 shows different scenarios for mounting the encoder wheel to
the conveyor belt.

•

A: Recommended encoder wheel position.

•

B: Don’t position the encoder above the holes of the belt.

•

C: Don’t position the wheel in range of the product stream. The encoder wheel shall
not roll over the edges of the products.

•

D: Be aware of not to mount the encoder wheel in a sloped position. The wheel has to
be aligned parallel to the belt.

•

E: Don’t position the wheel at the turnaround edge of the belt.

Pos: 135 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-Orbit/11.X_Ü2_Sample applications @ 2\mod_1271682057744_912.doc @ 16817 @ 1

Encoder wheel

Print medium

C D E

Summary of Contents for AS-Orbit

































































































































































































































Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands

quadient AS-Orbit, User Manual

Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands