quadient AS-Orbit User Manual Download Page 12

Page: 12 / 224

User Manual Version 3.1

1.3

Terms and abbreviations

This User Manual uses the following terms and abbreviations related to the

Quadient

AS-Orbit:

•

cartridge = Crt = C, C1, C2, C3

•

print unit = Unit = U, U1, U2
A print unit always consists of three ink cartridges.

•

print media width = expansion of the print media in transport direction.

•

print media height = expansion of the print media across the transport direction.

Pos: 11 /Bedienungsanleitungen/Geräte spezifisch/Drucker/1.4_Ü2_System requirements_ONLY_619 @ 2\mod_1272530190780_912.doc @ 17229 @ 2

1.4

System requirements

The

Quadient

AS-Orbit is designed to be used in connection with a PC. To connect the

AS-Orbit to the PC one free USB port or one free Ethernet (TCP/IP) port is required.
The PC should be an up-to-date model and must have enough processing power and free
disk space to run the

Quadient

Addressing Solutions Software.

We recommend using one of the following operating systems:

•

Microsoft Windows 2000 (SP4)

•

Microsoft Windows XP (SP3)

•

Microsoft Windows Vista (SP2) (32- or 64-bit)

•

Microsoft Windows 7 (32- or 64-bit)

Pos: 12 /Bedienungsanleitungen/Geräte neutral/2.0_Ü1_Sicherheitshinweise @ 0\mod_1242735234414_912.doc @ 1664 @ 1

Summary of Contents for AS-Orbit

































































































































































































































Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands

quadient AS-Orbit, User Manual

Search results

Summary of Contents for AS-Orbit

Reviews:

Related manuals for AS-Orbit

Brands by name

Popular brands