User Manual Version 3.1
211
diverted after the printer.
R&A&P
Only occurs in a specific, non-standard printer mode.
This text is shown when the Read and Acknowledge
and Print mode is active. This mode works like the
Read and Print mode, plus each page must be
acknowledged as “ok” right before the printer,
otherwise the page will be flagged as faulty. A faulty
page could for example be diverted after the printer.
CleanHds
Only occurs in a specific, non-standard printer mode.
This text is shown as answer, to a clean heads
request, sent over the serial port. This request can
only be used when one of the Read and X modes is
active.
TrackMod
Only occurs in a specific, non-standard printer mode.
This text is shown when the Tracking mode is active.
In this mode the printer monitors the paper flow. In
this mode the printer can, for example, detect missing
pages in the paper flow.
R&P&Tra
Only occurs in a specific, non-standard printer mode.
This text is shown when the Read and Print and
Tracking mode is active. Both the Read and Print
and the Tracking mode are working as described
above.
BeltMod
Only occurs in a specific, non-standard printer mode.
This text is shown when the Belt mode is active. In
this mode the transport system of the printer will run
continuously with the requested speed. This mode can
only be used when one of the Read and X modes is
active.
Belt&Tra
Only occurs in a specific, non-standard printer mode.
This text is shown when the Belt and Tracking mode
is active. Both the Belt and the Tracking mode are
working as described above.
F & B
F & b
f & B
f & b
NeopostAS-Orbit only
These operating status texts are only shown when the
Quadient
feeder and
Quadient
BASE conveyor are
connected via serial cables and
Printer Config. >
BOOT DEFAULTS > SERIAL Base
is set to
printBase
.
F
= Feeder running
f
= Feeder off
B
= Base conveyor running
Summary of Contents for AS-Orbit
Page 1: ...User guide AS Orbit Address Printer ...
Page 224: ...9204009J C 12 04 2021 ...
