QMS 2060 WX User Manual Download

Page: 85 / 208

About the Control
Panel

3-3

Control Panel

About the Control Panel

The Message Window

The message window provides two functions:

It displays status and error information. See chapter 7, “Trouble-
shooting,” for an annotated list of status and error messages.

It displays configuration options. Configuration is discussed later
in this chapter.

Message Display

Messages are displayed in three ways in the message window:

Continuous display — A short status message such as

Idle

displays continuously until the status changes.

Scrolling display — A longer status message, such as

Paper

out upper tray

, scrolls marquee-style so that you can read

the whole message whenever you happen to look at the printer.
In all tables throughout this manual, messages that scroll are
shown in shaded boxes.

Message Language

Messages and configuration options can be displayed in 6 languages.
See “Setting the Message Window Language” on page 3-9 for more
information.

Summary of Contents for 2060 WX

















































































































































































































Search results

Summary of Contents for 2060 WX

Reviews:

Related manuals for 2060 WX

Brands by name

Popular brands

QMS 2060 WX, User Manual

Search results

Summary of Contents for 2060 WX

Reviews:

Related manuals for 2060 WX

Brands by name

Popular brands