QMS 2060 WX User Manual Download

Page: 47 / 208

Configuring the
Windows NT 4.0
Printer Driver

2-33

Printing

Brightness

Color

This option is grayed out to indicate that it is not available on mono-
chrome printers.

Tint

This option is grayed out to indicate that it is not available on mono-
chrome printers.

Dark Picture

Negative

Purpose

Sets the intensity of the light in your picture.

Range

-100 (darkest) to +100 (lightest)

Default

Purpose

Adjusts images that are too dark.

Choices

Unchecked—Does not adjust image

Checked—Lightens the colors in the image

Default

Unchecked

Notes

Adjusting for overexposure can restore details lost due to a
lack of contrast.

Purpose

Sets image to positive or negative.

Choices

Unchecked—Does not adjust the image

Checked—Inverts the colors in the image—white to black and

black to white

Default

Unchecked

Summary of Contents for 2060 WX

















































































































































































































Search results

Summary of Contents for 2060 WX

Reviews:

Related manuals for 2060 WX

Brands by name

Popular brands

QMS 2060 WX, User Manual

Search results

Summary of Contents for 2060 WX

Reviews:

Related manuals for 2060 WX

Brands by name

Popular brands