Qlogic SANbox 5800V Series, Interface Manual

Page: 15 / 422

59263-02 A 1-1
1
Introduction
This guide describes the features and use of the command line interface for
SANbox 5800V Series Fibre Channel switches running firmware version 7.4. The
SANbox 5800V Series switch is a 24-port, 8-Gbps Fibre Channel switch. The
model 5802V switch has dual, replaceable power supplies; model 5800V has a
single non-replaceable power supply. This guide is organized as follows:
„
Section 1 describes switch models and features, the intended audience,
related materials, new items in this release, and technical support.
„
Section 2 describes logging on and off of a switch, opening and closing an
Admin session, entering commands, getting help, paging a switch, setting
page breaks, and loading and retrieving files.
„
Section 3 describes the management of user accounts and passwords.
„
Section 4 describes configuring the switch network configuration.
„
Section 5 describes managing the switch configuration, setting the date and
time, backing up and restoring the switch configuration, resetting the switch,
installing firmware, and installing feature licenses.
„
Section 6 describes port configurations, resetting a port, initializing a port
loop, configuring port threshold alarms, and testing ports.
„
Section 7 describes managing the zoning database.
„
Section 8 describes managing connection security.
„
Section 9 describes managing device security.
„
Section 10 describes managing the Remote Authentication Dial-In User
Service (RADIUS) server.
„
Section 11 describes events and event logging.
„
Section 12 describes managing Call Home email notification.
„
Section 13 describes managing the Simple Network Management Protocol
(SNMP) configuration.
„
Section 14 lists the commands in alphabetical order, including the command
syntax, keywords, notes, and examples.
An index is also provided.