Qlogic SANbox 5800V Series Interface Manual Download Page 192

Page: 192 / 422

14 – Command Reference

Command Listing

14-12

59263-02 A

The following is an example of the Capture Remove command:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture remove

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

The selected capture entry has been removed from profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Summary of Contents for SANbox 5800V Series







































































































































































































































































































































































































































Search results

Summary of Contents for SANbox 5800V Series

Reviews:

Brands by name

Popular brands

Qlogic SANbox 5800V Series, Interface Manual

Search results

Summary of Contents for SANbox 5800V Series

Reviews:

Brands by name

Popular brands