Qlogic SANbox 5800V Series, Interface Manual

Page: 165 / 422

12 – Call Home Configuration
Managing the Call Home Database
59263-02 A 12-11
A
Modifying a Profile
Enter the Profile Edit command to modify an existing Call Home profile as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> profile edit profile_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
Level Alarm
Format ShortText
MaxSize 1000
EmailSubject Switch Problem
RecipientEmail (up to 10 entries allowed)
1. john.smith@domain.com
New Value (press ENTER to accept current value, 'q' to quit):
Level (Alarm,Critical,Warn,None) :
Format (1=FullText, 2=ShortText, 3=Tsc1) : 1
MaxSize (decimal value, 650-100000) :
EmailSubject (string, max=64 chars, N=None) :
RecipientEmail (ex: admin@company.com, N=None)
1. john.smith@domain.com :
2. <undefined> :
The profile has been edited.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
SANbox (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y