Qlogic SANbox 5800V Series, Interface Manual

Page: 297 / 422

14 – Command Reference
Command Listing
59263-02 A 14-117
A
SSLEnabled Enables (True) or disables (False) secure SSL connections
for management applications including Enterprise Fabric
Suite 2007, QuickTools, Application Programming Interface,
and SMI-S. The default is False.
„
The SSL service requires the Fabric Security license key.
„
This service must be enabled to authenticate users
through a RADIUS server.
„
Enabling SSL automatically creates a security certificate
on the switch.
„
To enable secure SSL connections, you must first syn-
chronize the date and time on the switch and workstation.
„
To disable SSL when using a user authentication RADIUS
server, the RADIUS server authentication order must be
local.
EmbeddedGUIEnabled Enables (True) or disables (False) the QuickTools embedded
switch management application. QuickTools enables you to
point at a switch with an internet browser and manage the
switch. This parameter is the master control for the Set Setup
System command parameter, EmbeddedGUIEnabled. The
default is True.
SNMPEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use the Simple
Network Management Protocol (SNMP). This parameter is
the master control for the Set Setup SNMP command param-
eter, SNMPEnabled. The default is True.
NTPEnabled Enables (True) or disables (False) the Network Time Protocol
(NTP) which allows the synchronizing of switch and worksta-
tion dates and times with an NTP server. This helps to pre-
vent invalid SSL certificates and timestamp confusion in the
event log. The default is False. This parameter is the master
control for the Set Setup System command parameter, NTP-
ClientEnabled. The default is False.
CIMEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use SMI-S.
FTPEnabled Enables (True) or disables (False) the File Transfer Protocol
(FTP) for transferring files rapidly between the workstation
and the switch. The default is True.
Table 14-28. Switch Services Settings (Continued)
Entry Description