Qlogic SANbox 5800V Series, Interface Manual

Page: 139 / 422

9 – Device Security Configuration
Managing Security Sets
59263-02 A 9-11
A
Rename a Security Set
Enter the Securityset Rename command to rename a security set as shown in the
following example:
SANbox (admin-security) #> securityset rename securityset_old securityset_new
Copy a Security Set
Enter the Securityset Copy command to copy a security set and its contents to a
new security set as shown in the following example:
SANbox (admin-security) #> securityset copy securityset_1 securityset_2
Add Groups to a Security Set
Enter the Securityset Add command to add a group to a security set as shown in
the following example:
SANbox (admin-security) #> securityset add securityset_1 group_isl group_port
Remove Groups from a Security Set
Enter the Securityset Remove command to remove groups from a security set as
shown in the following example:
SANbox (admin-security) #> sescurityset remove securityset_1 group_isl group_port
Activate a Security Set
Enter the Securityset Activate command to apply security to the fabric as shown in
the following example:
SANbox (admin) #> securityset activate securityset_1
Deactivate a Security Set
Enter the Securityset Deactivate command to deactivate the active security set
and disable security in the fabric:
SANbox (admin) #> securityset deactivate